Avast Internet Security v7.0.1426 Incl License Key Valid Till 2014

Avast Internet Security v7.0.1426 Incl License Key Valid Till 2014 Free Download

Posted by dasuntha on 8:27 PM. virus gurds - No comments

Avast Internet Security v7.0.1426 Incl License Key Valid Till 01 27 2014..Avast is one of the best five antivirus in the world and is the one antivirus does not require a lot of RAM and CPU usage. In this article "Free Full Download"will share Avast Internet Security v7.0.1426 Incl License Key which you can use until 2014. Well for those of you who want to try, or may need to AIS v7 license key, please download before the license key is blacklisted.

Avast Internet Security v7.0.1426 Incl License Key screenshot:

Avast Internet Security v7.0.1426 Incl License Key Features:

• Engine: Blocks viruses & spyware
• Remote: Allows assistance from a geek friend
• SafeZone: Secures shopping & banking
• Sandbox: Lets you surf the web virtually
• Sandbox: Runs risky programs virtually
• Firewall: Blocks hacker attacks
• Firewall: Secures personal data
• Firewall: Secures your identity
• Anti-spam: Stops annoying SPAM
• Anti-spam: Blocks phishing scams
• Get our best protection for the price of Pro Antivirus

Operating Systems Supported:

• Windows 7 (any Edition, 32-bit or 64-bit)
• Windows Vista (any Edition excl. Starter Edition, 32-bit or 64-bit)
• Windows XP Service Pack 2 or higher (any Edition, 32-bit or 64-bit)
• Microsoft Windows 2000 Professional Service Pack 4 (incompatible with avast! Account)

Avast Internet Security v7.0.1426 Incl License Key Minimum Hardware Requirements:

• Pentium 3 Processor
• 128 MB RAM
• 200 MB of free hard disk space

How to install Avast Internet Security v7.0.1426 Incl License Key:
For activation The license of avast it can be do with 2 ways, that is:

The first way:

1. Extract license first
2. Install Avast as usual
3. While doing the installation, then will appear 3 options:
   - Install trial in Trial mode
   - Supply a license file
   - Supply an activation code
   
   Select the number 2, that is Supply a license file
   
   then locate the License file and then open.
4. Just click next next and next and next.
5. After installing, go to Avast "SETTINGS" and click "Community" and uncheck the box "avast Participate in the community" and click OK.

The second way:
This way you can use if for example you have avast is still in the trial version, or you have avast are in need of a new license:

1. Download and unpack the avast is 7.0.1426
2. Open Avast Internet Security and select "MAINTENANCE"
3. Then Click "Subscription" and click "insert license file"
4. Find the License file and ok. See, avast internet security 7 is turned on until date 01 27 2014
5. Next go to Avast "SETTINGS" and click "Community" and uncheck the box "avast Participate in the community" and click OK.

Download Avast internet Security v7.0.1426 (Installer Only) - (114MB)
Download Avast internet Security v7.0.1426 (License Only) - (1KB)
Password: betterfreedownload.blogspot.com

If You need More keys

download

sandwichvpm for mtn nand multilinks

Free Unlimited Browsing on MTN & Multilinks via Sandwich VPN

November 7th, 2012 07:26 AM | by Oscar | Free Browsing.  

Share on facebook Share on twitter Share on delicious Share on digg Share on stumbleupon Share on reddit Share on email Share on print More Sharing Services

Do you know that instead of paying for a limited amount of data bundle for a month, you have an unlimited data MB for a month almost for free. All you need to set this up is a Modem and a VPN software known as Sandwich VPN.
Register for an account at SANDWICHVPN.COM, after registering click on the Download and download the software.  A mail would be sent to you, then activate your account.

Now here is how to configure to browse for free and not only for free but with an unlimited data bundle.
FOR MTN USERS:
SUBSCRIBE TO MTN BB PLAN,EITHER 500/WEEK
OR
1500/MONTH HOW TO SUBSCRIBE: *TEXT BBC TO 21600 COST #1500 FOR A MONTH *TEXT BBCWEEK TO 21600 COST #500 FOR A WEEK.

Now after which you might have subscribe to any of the BIS BB plan stated above. Configure either your modem or pc suite with the following details
apn: blackberry.net
pswrd: web
dial up no. : *99#

Now locate the sandwichvpn you downloaded ,.instail and after instailation, right click then Run as Admin. Now input your username and passwd at the server and protocol,
change from TCP to UDP now select your ntw.( MTN_Nig) you are almost done, click on ports and select custom port( the 1st port) input 8080. Now you are good to go.click on Connect and wait for it to be CONNECTED.
Launch your browser once connected and start enjoying.

FOR MULTILINKS USERS:
Simply connect your modem to your pc and connect to the internet, Now locate the sandwichvpn you downloaded ,.instail and after instailation, right click then Run as Admin.
Now input your username and passwd at the server and protocol, change from TCP to UDP now select your ntw.( Mlinks_Nig) you are almost done, click on ports and select custom port( the 1st port) input 9200. Now you are good to go.click on Connect and wait for it to be CONNECTED.
Launch your browser once connected and start enjoying.

The Best 5 Web Proxy Sites To Hide Your IP Address Web proxies are clearly not the best option when it comes to hiding your IP address, but when no other options are available they are good enough. This is the case when you are at school or at work and you don’t have the rights to install any hide ip tool (like IP Hider, Hide-My-IP, Hide The IP, etc.) or to configure a VPN connection. 1. Hide My Ass Website existing since: 2005 Website URL: http://hidemyass.com/ 2. Anonymouse Website existing since: 2004 URL: Anonymouse.org 3. Vtunnel Website existing since: 2005 URL: https://www.vtunnel.com 4. Proxy.org Website existing since: 2004 Website URL: http://proxy.org/ 5. Proxify Website existing since: 2004 Website URL: http://proxify.co.uk/ Do you use web proxies to unblock your favorite site? What do you think it’s the best web proxy?

then try this.... please comment to motivate us to us to serve u more...

HOW TO STOP UNKNOWN NUMBERS OR STOP CERTAIN NUMBERS FROM CALLING YOU ON ANDRIOD PHONE

This Tutorial is Exclusively to all Andriod Users on Naijaloaded. Someone email us some fews days back to publish an Article on How to Stop some Unknown numbers from calling and also How to Block some Particulars from Calling.

Today, We're Glad to make the Articles go Live. Now you don't have to worry yourself about someone disturbing you with Unknown Numbers or giving yourself Unneccessary Headache trying to Avoid some Numbers when you can easily blacklist them on your Andriod device. Follow the Simple Steps below:-

HOW TO STOP UNKNOWN NUMBERS & HOW TO BLOCK SOME NUMBERS FROM CALLING YOU
1. Click on the Setting icon on your Phone Homescreen > Call > Call Rejection.

2. Click on Auto Reject Mode and select "Only Blacklist".

3. Now click on the Blacklist , Tick the Unknown [This will Stop any Unknown Number from Calling You]. Then Click the Add button to Add any Numbers you want to Stop from calling you and click on the Save button. You can add as many as Possible.

Thats All.

I NOW SELL CC, FULLZ, BANK LOGIN, PAYPAL, WESTERN UNION MONEY TRANSFER, DUMPS, TRACKS, MAILER, GIFT CARDS, VPN. BELOW IS THE PRICE LIST.

I NOW SELL CC, FULLZ, BANK LOGIN, PAYPAL, WESTERN UNION MONEY
TRANSFER, DUMPS, TRACKS, MAILER, GIFT CARDS, VPN. BELOW IS THE PRICE
LIST.
 
 
  ::::::::::::::::::::::::::::: Bank Login ::::::::::::::::::::::::::::::
Bank                 Balance In          Cost
CHASE bank $9,400 balance         112$
 
BOA bank         $8,900 balance         100$
 
BOA bank         $25,500 balance         1200$
 
HSBC bank £16,200 balance  650$
 
HSBC bank £5,200 balance          90$
 
HSBC bank £7.700 balance         120$
 
ABBEY bank £7,900 balance         100$
 
ABBEY bank £6000 balance          80$
 
HALIFAX (Random) 4K TO 80K          200$
 
Wells fargo (Random) 5K TO 450K 300$
 
Chase (Random) 7K TO 155K 150$
 
CREDIT UNION (Random) 5K TO 120K   300$
 
Citibank (Random) 3K TO 85K             250$
 
Wachovia (Random) 9K TO 265K      150$
 
UK ABBEY (Random) 5K TO 120K 175$
 
UK Lloyds (Random) 3K TO 120K         150$
 
icici  $4,400 balance 70$
 
Barclays $10,400 balance                   130$
 
Barclays $6,400 balance                         100$
 
 
  ::::::::::::::::::::::::::::: PAYPAL ::::::::::::::::::::::::::::::
Country Balance In  Cost
Paypal US $7,200 balance 166$
 
Paypal US $12,000 balance 600$
 
Paypal US $19,500 balance 998$
 
Paypal US $23,800 balance 1000$
 
Paypal US $24,600 balance 1200$
 
Paypal US $6600 balance 100$
 
Paypal US $14,000 balance 200$
 
Paypal US $22,100 balance 1500$
 
Paypal US $15,300 balance 1050$
 
Paypal US $2300 balance 70$
 
 
Paypal UK
 
Paypal UK 4,100£ balance 160$
 
Paypal UK 8,000£ balance 500$
 
Paypal UK 9,500£ balance 700$
 
Paypal UK 11,880£ balance 900$
 
Paypal UK 17,600£ balance 1200$
 
Paypal UK 3600£ balance 120$
 
Paypal UK 1310£ balance 90$
 
Paypal UK 18,100£ balance 1300$
 
 
 
 
 
  ::::::::::::::::::::::::::::: Fullz CC ::::::::::::::::::::::::::::::
Available us full , uk full ,
Stuff Country  Cost
Sell 5 visa US FULL 40$
 
Sell 10 visa US FULL 77$
 
Sell 20 visa US FULL 135$
 
Sell 30 visa US FULL 200$
 
Sell 5 amex US FULL 65$
 
Sell 10 amex US FULL 150$
 
Sell 5 master US FULL 60$
 
Sell 10 Master US FULL 115$
 
Sell 20 Master US FULL 210$
 
Sell 5 Discover US FULL 60$
 
Sell 10 Discover US FULL 110$
 
Sell 20 Discover US FULL 200$
 
United Kingdom Fullz
Sell 15 Visa UK FULL 200$
 
Sell 10 Visa UK FULL 150$
 
Sell 5 Master UK FULL 90$
 
Sell 10 Master UK FULL 150$
 
Sell 5 Amex UK FULL 70$
 
Sell 10 Amex UK FULL 130$
 
Sell 5 Visa  UK FULL 50$
 
 
Mailler
Sending 50,000 mail 1 month  United State  20$
 
Sending 10,000 mail 3 months  United State  35$
 
Sending 100,000 mail 1 month  United Kingdom  25$
 
Sending 100,000 mail 1 month  Spain 25$
 
Sending 100,000 mail 3 months  Spain 35$
 
Sending 100,000 mail 1 month  Italy 25$
 
Sending 50,000 mail  italy 20$
 
Sending 100,000 mail 1 month  Germany 25$
 
Sending 100,000 mail 3 month  Germany 35$
 
Sending 10,000 mail  Mix Country  25$
 
Sending 50,000 mail  Mix Country  30$
 
Sendin 100,000 mail  Mix Country  35$
 
 
 
 
 
:::::::::::::CVV::::::::::::::
           CVV United State Online
 
Sell 5 visa US  9$
 
Sell 10 visa US  17$
 
Sell 20 visa US  33$
 
Sell 30 visa US  50$
 
Sell 40 Visa  US  65$
 
Sell 50 Visa  US  85$
 
Sell 5 master US  17$
 
Sell 10 Master US  28$
 
Sell 20 Master US  58$
 
Sell 30 Master  US  88$
 
Sell 40 Master  US  118$
 
Sell 5 Amex  US 18$
 
Sell 10 Amex US 26$
 
Sell 20 Amex US 58$
 
Sell 30 Amex US 88$
 
Sell 40 Amex US 118$
 
Sell 5 Discover US 18$
 
Sell 10 Discover US 38$
 
Sell 20 Discover US 58$
 
Sell 30 Discover US  18$
 
Cvv United Kingdom Online
 
Sell 5 visa UK 25$
 
Sell 10 visa UK 45$
 
Sell 20 visa UK 90$
 
Sell 30 visa UK 145$
 
Sell 40 visa UK 200$
 
Sell 50 visa UK 240$
 
Sell 5 Master  UK 25$
 
Sell 10 Master UK 45$
 
Sell 20 Master UK 90$
 
Sell 30 Master UK 145$
 
Sell 40 Master UK 200$
 
Sell 50 Master UK 240$
 
Sell 5 Amex  UK 25$
 
Sell 10 Amex UK 45$
 
Sell 15 Amex UK 70$
 
Sell 20 Amex UK 90$
 
Sell 30 Amex UK 145$
 
Sell 5 UK full info UK 70$
 
Sell 10 UK full info UK 130$
 
Cvv France Online
 
Sell 5 France UK 40$
 
Sell 10 France UK 70$
 
Sell 15 France UK 110$
 
Sell 20 France UK 150$
 
Sell 25 France UK 200$
 
Sell 30 France UK 240$
 
Sell 40 France UK 300$
 
Sell 5 France UK 40$
 
Sell 10 France UK 70$
 
Sell 15 France UK 110$
 
 
 
 
 
 
:::::::::::::Dump's::::::::::::::
Master :::::::: Visa ::::::: Discover :::::::::: Amex
Bin Country TR1+TR2 or TR2 Price
422497******8503  US track2 $30
 
422770******5222  US track2 $30
 
422476******3990  US track2 $30
 
422476******4854  US track2 $40
 
405812******3523  US track2 $40
 
422504******3140  US track2 $30
 
422497******9502  US track2 $30
 
422748******4933  US track2 $30
 
422476******1549  US track2 $30
 
422482******7471  US track2 $30
 
422502******6964  US track2 $30
 
422497******5103  US track2 $30
 
422473******3047  US track2 $30
 
422337******5559  US track2 $30
 
422497******9103  US track2 $30
 
422487******5556  US track2 $30
 
422497******4109  US track2 $30
 
422769******9773  US track2 $30
 
422646******3069  US track2 $30
 
 
 
 
 
  ::::::::::::::::::::::::::::: Gift Cards ::::::::::::::::::::::::::::::
Available Amazon , Ebay , Walmart , BestBuy ,
Amazon
Item Brand  Cost
100$ Card Amazon 25$
 
300$ Card Amazon 75$
 
500$ Card Amazon 125$
 
  
Ebay
$100 Card Ebay Card 25$
 
$200 Card Ebay Card 75$
 
$500 Card Ebay Card 125$
 
Walmart
$100 Card Walmart Card 25$
 
$200 Card Walmart Card 75$
 
$500 Card Walmart Card 125$
 
BestBuy
$100 Card BestBuy Card 25$
 
$200 Card BestBuy Card 75$
 
$500 Card BestBuy Card 125$
 
 
 
   Wu Admin Pro
Western Union Money sending Software Worldwide 150$
 
 
   Wu Admin Pro
Credti card to Liberty reserve Transfer Worldwide 200$
 
 
BONUS FOR YOU
 
Number: 4224960018581626
EXP: 0613
CVV: 947
Name: SARA DEHAAN
Country: United States
State: WV
ZIP: 24701
City: BLUEFIELD
Street: 1712 College Ave
Phone: 304.325.7606
Bank: FIRST COMMUNITY BANK, NATIONAL ASSOCIATION CLASSIC
 
 
4003447010550061 07/14 505 Anita S Glass 3211 Quakertown Drive San
Antonion TX 78230
 
 
Number: 5581588040436099
EXP: 0413
CVV: 530
Name: Amanda Vernor
Country: United States
State: FL
ZIP: 32177
City: Palatka
Street: 124 Taylor Rd
Phone: 3869729095
Bank: JP MORGAN CHASE BANK N A BUSINESS
 
 
Number: 372551016341002
EXP: 0414
CVV: 6985
Name: Marquis Nichol
Country: United States
State: CO
ZIP: 80003
City: Arvada
Street: 5805 W. 81st Circle
Phone: 3037477205
Bank: AMERICAN EXPRESS COMPANY PLATINUM
 
 
Number: 4356430079778990
EXP: 0313
CVV: 456
Name: sean wright
Country: United States
State: Oregon
ZIP: 97217
City: portland
Street: 718 n. winchell
Phone: 503-473-6952
Bank: BANK OF AMERICA, NATIONAL ASSOCIATION PLATINUM
 
 
 
 
TO ORDER FOR ANYONE OF THE ABOVE ITEM, JUST CALL ME ON 07065807353 or
08065463607, OR
PM ME ON gtalk "abbeyg4love@gmail.com" or add me on
2go abbeyg4love

software to minimize in java fones....

with this application may create
multiple applications with a
maximum of 5 files. It also lets
you add the options screen
brightness, password and
optimize memory. HOW TO USE after download, open application. Go to your app manager and set the
application add and edit user data to
always allowed close and reopen application again. using xplore or blueftp rename the jar files you wan to use for this
project from .jar to .zip on the multimidlet menu, select path
to the folder where the apps you
want to use for this project is.
open the folder and on each app,
press options and select add to list After adding all the midlets you want
to use, click view list when the list is viewed, make sure
the files are checked. press options and select start merge A new window will pop open. on this
window you can change various
parameters icon here you can put the path to any
icon you want to use for this app. eg
if my icon is located in memorycard
which is E:, and the name of my icon
is babadinho.png, i will simply delete
the icon.png and put babadinho.png program name you can change to your name or
eg....casts-apps-multimidlet Name you can use same metthod as above author your name here save path puth name and path you want to
save to AFTER ALL SAID AND DONE, CLICK
START MERGE AND WAIT FOR YOUR
APP TO BE READY... when its done, you can locate app
under E:multimidlet folder
download

USE SIM IN YOUR MODEM WITHOUT UNLOCKING

Trick To Use Any Sim Without Unlocking Modem [Tested]

Most modems are locked to a particular network and hence cant be used for any other operator except the one for which it is made but don't worry now you can use any sim in any modem Just follow the bellow steps........

This tutorial will enable you to use any Sim card on your Modem. You don't need to unlock it before it will work. But before proceeding with the steps you will need some tools

RWQUIRED TOOLS FOR THE TUTORIAL:
* Any Locked Modem of any network.
* The sim with or without internet plan which you want to use.
* Nokia Pc Suite Installed on your Operating System.

HOW TO USE ANY SIM CARD IN YOUR MODEM WITHOUT UNLOCKING

Step 1. Download Nokia PC Suite to your PC, if you don't have it installed yet, use Google Search to Find where to download it free.

Step 2. Insert any SIM into your Modem [Even if it is not Unlocked] and Plug it to your PC.

Step 3. Your Modem will display Invalid Sim Warning, you need to ignore it and close modem software.

Step 4. Start NOKIA PC SUITE.

Step 5. Click on File ==>> Connect to the
Internet, Then click on the the Spanner Icon to Configure it.

Step 6. Select your Modem from the List, and Input the Operator APN setting as when you want to use Nokia mobile connection.

EXAMPLE:
Airtel-- internet.ng.zain.com

MTN-- web.gprs.mtnnigeria.net

Glo-- glogwap

Etisalat-- etisalat

Step 7. That is the Complete step. If you Finish Set up then proceed.

Step 8. Now connect to the internet through PC suite.

Step 9. Now You are connected to the Internet using your PC Suite + Modem without unlocking the modem.


IMPORTANT NOTE: You can insert another Sim Card and follow the steps outline above you put the APN of the network provider and you are ready to go.

browse with laptop server with ur fone

THINGS U WOULD NEED ARE, 1= YOUR LAPTOP
RUNNING ON WINDOW XP 0R VISTA, MACOS,LINUX
IT DOES NOT WORK ON WINDOW 7 SORRY WINDOW
SEVE USERS

STEP 2 =YOU NEED A SYMBIAN PHONE NOKIA,
SONY ERICSON

SOFTWARES U WILL NEED TO GET ARE 1=python
2.6.5, 2=pybluz 3=python for s60 and
python scriptshell 4=minibtproxy. GET THEM
WHEN YOU HAVE THEM LET ME KNOW.

TO DOWNLOAD PYTHON 2.6.5CLICK THIS LINK
http://adf.ly/DMtW

TO DOWNLOAD ON EVERY LINK I GIVE YOUR JUST
CLICK ON SKIP ADS ON TOP CORNER OF THE
PAGE YOUR DOWNLOAD WILL START AUTOMATICALLY.

SORRY GUYS,AM BACK.TO DOWNLOAD PYBLUEZ JUST CLICK HERE http://adf.ly/DOUX
PRESS SKIP ADS TO BEGIN DOWNLOAD

now to download python for series 60 phone
with script it must be dis one, click here
http://adf.ly/DQxh click on skip ads to
begin downloads automatically

OK FIRSTLY INSTALL PYTHON 2.6.5 ON YOUR
SYSTEM,STEP TWO=AFTER YOU HAVE INSTALLED
THE PYTHON INSTALL PYBLUEZ

now goto your phone and install the python
i gave the download link,install python
for s60 with script.

now go back to your laptop open the
minibtproxy you downloaded it consist of
two files name minibtproxy_client.py and
minibtproxy_ service.py. now extract the
minibtproxy_service.py to your destop and
send the minibtproxy_client.py to your
phone.

now you must put the minibtproxy_client in the directory where
you installed your python if you installed
in memory card use xplore to explore your
memory card you will find a folder named
python put the minibt_client.py there and
if it is in your phone memory do it the
same way.

OK IF YOU ARE DONE WITH THAT CREATE AN
ACCESS POINT ON YOUR PHONE, NAME IT
ANYTHING YOU LIKE, dont put anything in
homepage and access point leave it blank
and goto advance IN PROXY PUT 127.0.0.1
PORT USE 1234

NOW PAIR UR PHONE AND UR LAPTOP WIT
BLUETHOOT AND ADD TO TRUSTED DEVICE
NOW CONNECT UR LAPTOP TO THE INTERNET

8)NOW ONCE YOUR SYSTEM IS CONNECTED TO THE
INTERNET LAUNCH YOUR MINIBT_SERVER ON YOUR
SYSTEM WAIT FOR IT TO DISPLAY INIT SERVER
AFTER THAT GOTO UR PHONE LAUNCH PYTHON
PRESS OPTION CLICK ON LAUNCH SCRIPT CHOOSE
MINIBTPROXY_ CLIENT.PY THENIT WILL SEARCH
FOR YOUR LAPTOP BLUETHOOT ONCE IT FOUND
YOUR LAPTOP CHOOSE YOUR LAPTOP THEN IT
WILL DISPLAY BT CLIENT STARTED FOLLOWED BY
LOACAL PORT OPENED ON YOUR SYSTEM SCREEN
IN THE MINIBT_SERVER.PL IT WILL DISPLAYBT
PORT OPENED.

NOW LAUNCH YOUR PHONE DEFAULT BROWSER MAKE
USE OF THE ACCESS POINT U CREATED THEN
START TO FLEX .MIND U, U ARE NOT USING UR
NORMAL NETWORK U ARE USING YOUR LAPTOP
INTERNET CONNECTION FEEEEEEEL THE SPEED.
WORK WITH ALL DEFAULT APPLICATIONS ON YOUR
PHONES AND GOOD FOR UPDATING

By passing network connection easily

HOW TO BYPASS WIRLESS AUTHORIZE CONNECTION
« on: September 09, 2012, 10:07:52 AM »
Publish
Quote
FIRST FACTS:

-WEP stands for Wired Equivalent Privacy
-WEP is used to secure wireless networks from eavesdroppers
-WEP usually takes hours to cr*ck

WEP has always been a long and tedious job, untill recently, when two FBI agents demonstrated how it´s possible to cr*ck WEP in under 4 minutes (3 to be exact).

Here is how they did it:
[/glow][/glow]

1. Run Kismet to find your target network. Get the SSID and the channel.

2. Run Airodump and start capturing data.

3. With Aireplay, start replaying a packet on the target network. (You can find a ‘good packet’ by looking
at the BSSID MAC on Kismet and comparing it to the captured packet’s BSSID MAC).

4. Watch as Airodump goes crazy with new IVs. Thanks to Aireplay.

5. Stop Airodump when you have about 1,000 IVs.

6. Run Aircrack on the captured file.

7. You should see the WEP key infront of you now.

PROGRAMS USED:

-Kismet

Kismet is an 802.11 layer2 wireless network detector, sniffer, and intrusion detection system.
It is designed for Linux.

You can download it at www.kismetwireless.net
A windows version can be downloaded at http://www.renderlab.net/projects/wrt54g/kiswin.html

-Aircrack (Includes Airodump, Aireplay, Aircrack and optional Airdecap for decrypting WEP/WPA capture files)

Aircrack is the 802.11 WEP and WPA-PSK keys Crakin program that can recover this keys once enough encrypted packets have been captured with airodump.

Airdecap is used to decrypt WEP/WPA capture files.

Airmon can be used to configure the wireless card.

Aireplay is used to inject frames.

Airodump is used for packet capturing of raw 802.11 frames and is particularly suitable for collecting WEP IVs (initialization vectors) for the intent of using them with aircrack-ng.

Download the whole suit at www.aircrack-ng.org

how to download and install windows8

YOU MAKE IT 30GB or even 40 like i did JUST FOR EXTRA.



DOWNLOAD LINKS

32 bit (x86) - http://iso.esd.microsoft.com/WCPDL/BD1B8A49393E30CC9C4E5C88457D73E964F1F3B18/Windows8-ConsumerPreview-32bit-English.iso
64 bit (x64) - http://iso.esd.microsoft.com/WCPDL/BD1B8A49393E30CC9C4E5C88457D73E964F1F3B18/Windows8-ConsumerPreview-64bit-English.iso


Product Key: DNJXJ-7XBW8-2378T-X22TX-BKG7J

After downloading, burn the iso image using any burning tool like PowerIso or DaemonTools to an empty DVD disc.

BUT if you want to install to a Flash Drive (At Least 4GB). You can follow the following instructions below to make a bootable flash drive.

1

Connect the USB flash drive to an open port on your computer. Windows will recognize the drive as an external device.

2

Click the Windows "Start" button. Type "run" and press "Enter."
Type "cmd" in the Run box and press "Enter."
Type "diskpart" when the command prompt window opens.
Press "Enter." A new disk part window will open.

3

Type the following commands into the window that just opened:

Type "list disk" and press "Enter." This command will list all the disk drives connected to your computer.
Find the number of the USB drive that you'll be using for your Windows installation and write it down.

Type "select disk #" but replace the "#" symbol with the correct number for your USB drive. Press "Enter."

Type "clean" and press "Enter." (Retry if it give error)
All data on the flash drive will be erased to make room for the Windows operating system.

Type "Create partition primary" and press "Enter." This will make the flash drive a primary partition.
Type "Select primary partition." Press "Enter."

Type "active" and press "Enter."

Type "format fs=fat32 quick" and press "Enter."

Type "assign" and press "Enter. (Ignore if it give error)"

4

Copy the Windows installation files from your ISO disc image to the USB flash drive.
Use WinRAR, PowerISO or 7-ZIP to open the ISO file and copy the Windows installation files to the flash drive.

5

Reboot the computer and configure the BIOS to boot from the USB flash drive.
The method for accessing the BIOS setup page varies depending on your computer brand and model.
Refer to your computer's documentation for specific instructions.

6

Restart the computer. The PC will boot from the USB flash drive.
The Windows installer will autorun and begin installing a fresh copy of Windows 8 on your computer.


(WARNING : If you don not know how to navigate through your BIOS to make it read from Flash drive first, before your hard drive, please just use the safer DVD method above.)

Let me know if you face any issues! Thanks!

best making money site sign up and get $2

this is one of the best making money site,try it and see.....it pays out on $2 and u get $2 bonus afta sign up...goto.....http://incomepart.com/ref.php?page=act/ref&invcod=308224

how to download 2go in china fones and techno

Many People have been asking for this, Now its here courtesy of Naijaloaded.com... This is a Short Tutorial / 2Go App Review specially Modded for Techo/China Phones.

Many People never believe 2Go would work on a Techno phone or a chinese phone, but the simple Truth is that it works Fine and Clean. All you need to do is download any of the 2Go modded 2Go below and start chatting.
=> Download 2Go for Techno/China phones 1
=> Download 2Go for Techno/China phones 2
=> Download 2Go for Techno/China phones 3
=> Download 2Go for Techno/China phones 4
Enjoy Chatting!!!

How to hack wlan with cain and abel

 STEPS TO FOLLOW.
1. download this software called CAIN $ ABEL at You are not allowed to view links. Register or Login   Install and run it.

 2.click CONFIGURE in d top bar

3.in the SNIFFER TAB,click the adapter which is connected to the network to be sniffed,then click APPLY,then click OK.

  4.click d SNIFFER tab in d main window

  5.click the network card in d top bar 2 and icon from yr lefthand side

  6.click the BOTTON in d top bar

  7.select ALL HOSTS in my subset,click OK. entries should appear in d main window under the IP address,MAC address and OUI fingerprint headings.

  8.from d sniffertab,click APR in d bottom tab

  9.click the top right pane in d main window,click d bottom in d topbar.

  10.click on the router in d left pane.the router is generally the entry which has d lowest final IP value(xx.xx.xx.xx).highlight d IP address to sniff in the right pane.click OK.

 11.click d ARP icon in d topbar 3rd icon from d left.wait until other users have logged into websites on other computers.depaending on d size of d network and the traffic which this network receives.this can range from mins to hours.

 12.After sometime,click PASSWORDS in d bottom tab.

  13.Finally in d leftpane,select the BOLDED entries.The right pane should show the TIME,SERVER,USERNAME,PASSWORD in plaintext and d site accessed thats all,if u finally succeed,good for you,..E N J O Y !!!!!!

                              GOOD LUCK

latest cheat for etisalat 1st sep ,2012

Another Hot Cake for all Etisalat users!!! Enjoy it while it last. Confirmed Working as at the Time of Posting this...

LATEST OPERA TWEAK ON ETISALAT
HTTP:- http://82.145.210.160
Socket:- socket://82.145.210.160
Host:- www.twitter/etisalat

=> Forget Not, Hit the Share Link and Enjoy the Groove!!!

How to install unsign app on nokia 808 and nokia E7

Nokia 808 and E7 PureView, the latest imaging flagship from Nokia is out now in the market and many of you would have already had your hands on this camera-killer phone. However I must say that any smartphone can’t be utilized to its full potential as long as its not ha*ked/jailbroken. Until the release of Nokia 808  (Belle FP1), Norton Symbian ha*k was working fine (still working in all pre-Belle FP1 and first gen Belle FP1 phones) but many Nokia 808 and E7 users have reported that the Norton app is giving “expired certificate” error on installation.

First of all, uninstall any antivirus app (like FSecure etc) you already have in your phone as we will install Trend Micro app later in this method and presence of two security app at a time might render the phone unstable

Download this zip file and extract the contents anywhere in the phone (preferably make a new folder and extract file’s content in it). It contains following files –

Nokia808BelleFP1_H@ck_by_naijaonpoint.sisx
X-plore_1.58.sisx
TM_Mobile_Security.sis
ROMPatcherPlus_3.1_Lite.sisx

Now first install Nokia808BelleFP_H@ck_by_naijaonpoint.sisx  file, ignore any warning and continue with installation

Then install X-plore_1.58 (skip this step if you already have X-plore latest version installed)

Launch X-plore and open C: drive.

Go down u will see a file called “tmquarantine.zip open it and Extract to “tmquarantine folder” ,

bat be4 Extract it u need to make Dir to dis NAME as tmquarantine






Now install TM_Mobile_Security app and launch it. Go to “Options/Quarantine list”. There should be three files in this list, mark all three via Options and then restore them. Confirm the action and after restore process is successful exit Trend Micro app. Uninstall TrendMicro by touching and holding at its icon in phone menu and select “Delete” option from the popup. Confirm the prompt and wait for the process to complete.









U ARE DONE WITH THE MOBILE SECURITY

Now install ROM Patcher+ Lite and launch it, enable two patches (installserver RP+ 1.7 and open4all RP+) and done! Now enjoy installing any unsigned app and full system access (sys, private folders). Better add these patches to “Auto” via options in ROM Patcher so that you won’t have to enable them after every phone restart.



THAT ALL U ARE DONE WITH UR H@CKIN ENJOY

 DIS STEP I DROP DONT NEED SYS\BIN OR INSTALLSERVR AGAIN

IF U NEED MORE HELP U CAN CALL xbuck ON 08034704911

AM ALWAYS ON POINT GUYZ

Note – Sometimes the phone goes in restart-loop (restart again and again) due to Trend Micro app compatibility issue. If this happens then switch-off the phone and then switch it on, just when the home screen shows up (do this process quickly and I mean real quickly) touch menu button, when the menu appears scroll down the screen to the end of the menu where Trend Micro icon shows up, touch and hold at this icon until options pop-up. Select “Delete” and confirm the action. Wait for uninstallation of Trend Micro app. However if the phone freezes and restart during any stage of the above quick maneuver then do not panic, just try again the whole process thinking that you were not quick enough last time. Actually Trend Micro app auto-runs at phone start (and freezes the phone) but it takes few seconds to run. You have to delete it before it launches itself (every second counts).

WARNING – Ha*kin is safe only in the hands of power users and it is certainly not meant for novices so do it at your own risk and only when you perfectly know what you are doing. I am not responsible if anything goes wrong, Damilola say so!

hide ur sms number from appearing

Have you ever thought of Messaging someone via SMS without your Phone Number Appearing? Yes, Am sure one way or the other you would have thought of doing this.. This is a Short Tutorial on How to do that.

Instead of Using Bulk SMS, You can use this Method to Send Anonymous SMS to anybody. Just Follow the Step below:-
HOW TO SEND ANONYMOUS TO ANYBODY ON YOUR PHONE
1. Supposing you want Send an SMS to 08065501731, Go to Message > Settings > Text message > Sms Sending Profile > Set the Option "Send Sms As" to "Email"
2. You'll be asked for Sms Server, Just put the Phone number you're hiding your Identity from into the Space "08065501731", Just Save and Activate it.
3. Now, Go to Create New Sms, Then click Send, You will be asked for your email address, Put this without quotes "PQR @ ABC" where 'PQR' & 'ABC' is anything you want (You can out anything Inside, You might decide to use your Real Email Address).
4. Now Send the Message, You're done. Your recipient will recieve message from "PQR @ ABC" without your number. No Traces left.
=> Click on the Like, Share, Tweet Button if you Appreciate this Post.

make your blackberry loads fast when its slow

Have you ever wonder why your Blackberry phone is slow and sometimes freeze? Well, The Simple truth is "Every Action, Process on your Phone is Logged". You check Mail, Use Facebook, Chat on Facebook, Use BBM, Yahoo! Messenger, Twitter, All this Processess are logged in the Blackberry Event Logs.

Once the Saved Logged hit some certain levels, It tells on the Phone and then it begins to Slow down the RAM of the Phone, The Simple Solution is to clear the Event Log Register and Free your Phone from any unneccessary behaviour.
FOLLOW THIS STEPS TO CLEAR YOUR PHONE EVENT LOG
1. Hold down the ALT key and press LGLG (the letters) while on your Home screen.
2. You will have to wait a bit while your Phone loads, You will see your event logs.
3. Now, Click the Blackberry menu button and select "clear log" this will clear your Phone Log and keeps your phone working 100% faster!

It works perfectly!!!

Browse direct without software on pc with your blackberry

Its First from Naijaloaded Again, What a lucky day for the Blackberry Users.. Do you know you can now Browse with your MTN Blackberry Subscription on PC without any Software?

We know Most of you Guys really Surf the Internet during the time of Freegate, Tor, Ultrasoft etc using your Blackberry BIS Subscription, Now its here again but this time no Software or Application is needed before you can Rock the Internet on your PC. Let's get Started.
Materials Needed
1. Your Blackberry Phone
2. Blackberry Desktop Manager Software
3. Tether Application
4. A USB Cable.
Do you have all the Needed Materials in Place? You can always Google Search to get any Online e.g the Tether App and the Desktop Manager if you don't have it... Then Follow this Steps below to Get things done.
STEPS NEEDED TO MAKE YOUR BIS WORK WITH BIS WITHOUT ANY SOFTWARE
1. Install your Blackberry Desktop Manager software to your computer as you have been installing all other software, Skip this Step if you already have it Installed.
2. Install the Tether Application toyour Blackberry phone (What the App does is to powers your Blackberry for a stable connection with your Desktop Manager).
3. Conenct your Blackberry Phone to your PC via the USB Cable, Now Open your Blackberry Desktop Manager, Click on “Internet Mobile” located at the bottom left. Now provide your normal service provider’s information i.e like your APN and the rest, Then Save it.
4. Set your Browser e.g Mozilla, Chrome and Other Software to No Proxy, Thats all.
Note:- Make Sure you Configure the Tether App you Installed on your Phone with the Normal MTN Settings.
Now connect and browse till your subscription expires… Thats it!!!

how to hack any websites username and password and more

To start with I know you must have heard about it somewhere or you might think it’s impossible, but the truth of the matter is that it is very possible and below is the breakdown.
• The clone of the web page is created.
• The HTML of the website is edited and re-coded.
• The website is hosted on a free web host server with a domain name similar to the website
E.g. for Facebook – facebook.1x.net of Facebook1.net. This is how the clone website will work.
When any visitor enters his username and password and click the login button two things happen without the user knowing simultaneously (at the same time).
1. The username and password is saved on a separate page where you can see them.
2. The user is redirected to the original website.
Sweet right ?!
Now how do you get people to visit the clone website ? this Is where it gets more interesting. You can send them notification emails pretending to be from the website. E.g for Facebook, you send them a friend request and edit the link to direct them to your clone website or a notification email asking them to click a link leading to your clone website. Cool ? No, too cool !!
Now you might want to send this email to thousands of people this is where inbox mass mailer comes in. the mailer can be used to send emails to thousands of people at a time. But wait that’s not the best part, the best part Is that the sender address can be edited i.e. I can just put any email address as the sender e.g. billgates@microsoft.com
I think you’ve gotten the whole point now.
Now am going to make it easy for you, all these can be done for you at a tiny affordable price. Here is what the clone website package will contain:
• The clone website (any website of your choice).
• A personal mass mailer (to send emails).
• Free hosting and setup with domain.
To start hacking you simply logon to the the website , send the emails, open the data page and copy the usernames and passwords of your victims. Cool right
All these is just for a paltry sum of N1,000 cheap right?
To get the package contact:

denco2xbuck@hotmail.com or call (+234)08034704911

how to create a fake login page without beeing an expert

Now it's easy to build a Fake Login Pages without any knowledge of Programming Languages.


One can use http:// www.jotform.com to build the Sign Up page.

{1} Open www.jotform.com and Sign Up.

{2} then Login there with your newly registered account.

{3} now click on ' Create your first form'.

{4} Now delete all the pre-defined entries, just leave 'First Name:' (To delete entries, select the particular entry and then click on the cross sign.)

{5} Now Click on 'First Name:' (Exactly on First Name). Now the option to Edit the First Name is activated, type there "username:" (for Gmail) or YahooId: (for Yahoo)

{6} Now Click on 'Power Tool' Option (In right hand side...)

{7} Double click on 'Password Box'. Now Click the newly form password entry to edit it. Rename it as 'Password:'

{8} Now Click on 'Properties' Option (In right hand side...). These are the form properties.

{9} You can give any title to your form. This title is used to distinguish your forms. This Title cannot be seen by the victim.

{10} Now in Thank You URL you must put some link, like http:// www.google.com or anything. Actually after entering username & password, user will get redirect to this url.(Don't leave it blank...)

{11} Now Click on 'Save'. After saving, click on 'Source' Option.

{12} Now you can see two Options, namely 'Option1' & 'Option2'. Copy the full code of 'Option2'.

{13} Now open Notepad text editor and write the following code their. Paste the Option2 code here

{14} And now save this as index.html. And then host it, mean you will have to put it on the internet so that everyone can view it. Now i think that you would be knowing it and if in case you do not know it please leave a comment with your email-id and i will mail you how to do it.

Now you can view it by typing the url in the address bar.



NOTE: If u want to send it to the internet, then first you will have to create a hosting account which you can create on www.110mb.com and there are many other sites which you can find on the internet very easily. I suppose that you created your account at 110mb.com now login to your account then click on "File Manager", then click on "upload files" or just "upload". Then select the file which you want to send to the internet and click on upload. And you are done. Now you can access you file on the net by just typing the url of the file. And you will receive password of the users that login to your site through email-id which you've entered while creating the form.

Thats how you can create fake login page for your desired site.

comment after confirming please,so that we will serve u the more...

how to hack avast 6.0 anti virus

I would like to share this Avast Free License Key as a
new month gift to all my esteemed readers.


The key is - W6754380R9978A0910-4TZ59467

How to Use this license key

Please this key should only be used for non-
commercial only.

 Use the license at your own risk
 because there is no guarantee that Avast would not
block the license in the future. Perhaps it will greatly
 help those who do not have internet service on their
 pc.

Download Avast Free Antivirus 6.0
(download from cnet server)

http://download.cnet.com/Avast-Free-Antivirus/3000-2239_4-10019223.html?part=dl-85737&subj=dl&tag=button

After download is successful. Install Avast Free Edition
when installation is complete launch it and go to
registration under the maintenance tab.

Click on Insert License Key. Copy the key and paste in
the fill provided.

And click on activate.

This key will is active until 2038. It will activate the
software for more than 30 years.
And apparently the
 license key can also be used for any other Version of Avast.

please comment after confirming...