how to download and install windows8

YOU MAKE IT 30GB or even 40 like i did JUST FOR EXTRA.



DOWNLOAD LINKS

32 bit (x86) - http://iso.esd.microsoft.com/WCPDL/BD1B8A49393E30CC9C4E5C88457D73E964F1F3B18/Windows8-ConsumerPreview-32bit-English.iso
64 bit (x64) - http://iso.esd.microsoft.com/WCPDL/BD1B8A49393E30CC9C4E5C88457D73E964F1F3B18/Windows8-ConsumerPreview-64bit-English.iso


Product Key: DNJXJ-7XBW8-2378T-X22TX-BKG7J

After downloading, burn the iso image using any burning tool like PowerIso or DaemonTools to an empty DVD disc.

BUT if you want to install to a Flash Drive (At Least 4GB). You can follow the following instructions below to make a bootable flash drive.

1

Connect the USB flash drive to an open port on your computer. Windows will recognize the drive as an external device.

2

Click the Windows "Start" button. Type "run" and press "Enter."
Type "cmd" in the Run box and press "Enter."
Type "diskpart" when the command prompt window opens.
Press "Enter." A new disk part window will open.

3

Type the following commands into the window that just opened:

Type "list disk" and press "Enter." This command will list all the disk drives connected to your computer.
Find the number of the USB drive that you'll be using for your Windows installation and write it down.

Type "select disk #" but replace the "#" symbol with the correct number for your USB drive. Press "Enter."

Type "clean" and press "Enter." (Retry if it give error)
All data on the flash drive will be erased to make room for the Windows operating system.

Type "Create partition primary" and press "Enter." This will make the flash drive a primary partition.
Type "Select primary partition." Press "Enter."

Type "active" and press "Enter."

Type "format fs=fat32 quick" and press "Enter."

Type "assign" and press "Enter. (Ignore if it give error)"

4

Copy the Windows installation files from your ISO disc image to the USB flash drive.
Use WinRAR, PowerISO or 7-ZIP to open the ISO file and copy the Windows installation files to the flash drive.

5

Reboot the computer and configure the BIOS to boot from the USB flash drive.
The method for accessing the BIOS setup page varies depending on your computer brand and model.
Refer to your computer's documentation for specific instructions.

6

Restart the computer. The PC will boot from the USB flash drive.
The Windows installer will autorun and begin installing a fresh copy of Windows 8 on your computer.


(WARNING : If you don not know how to navigate through your BIOS to make it read from Flash drive first, before your hard drive, please just use the safer DVD method above.)

Let me know if you face any issues! Thanks!